Industrial Protocol Converter-PUSR Store - Official Store for IoT Devices and IoT Modules

Top Sellers

$258.00

Gigabit Edge Router

$34.90

Network IO Controller

$295.20

Integrated Screen of IOT

$276.00

Industrial Mini Computer

$215.00

High Performance Edge IoT Gate...

$17.99

Gigabit Industrial Ethernet Sw...

Product Name：Industrial Protocol Converter

Model：USR-PX520/PX530/PX511/PX531

USR-PX520
Catalog	Parameters	Value
Power Supply	Power Input	9-36V DC, 12V/1A is recommended
	Working Current	Idle: 158mA/12V (avg), 163mA/12V (max); Full load: 162mA/12V (avg), 165mA/12V (max)
	Connector	5.08×2P pluggable terminal block with anti-reverse and screw lock
RS485 Interface	Connector	3.81×3P pluggable terminal block with screw lock
	Pin	A (RS485 A), B (RS485 B), G (GND)
	Baud Rate	600~230.4K bps
	Data bits	8
	Stop bit	1, 2
	Parity bit	None, Odd, Even
Ethernet Port	EtherCAT	2× EtherCAT ports (IN/OUT), 10/100Mbps auto-negotiation, integrated switch functoin
	Ethernet	1× RJ45 port (10/100Mbps, auto MDI/MDIX)
	Default IP	192.168.0.7
	Gateway IP	192.168.0.1
Other Interface	Indicators	PWR, WORK, 485, ECAT
	Reload Button	Press for 3–15s to restore factory settings
	Type-C	Debugging interface for troubleshooting
Physical Parameters	EMC Protection	IEC 61000-4-2(ESD): 6kV contact, 8kV air IEC 61000-4-5(Surge): 2kV common mode, 1kV differential mode for power; 2kV for Ethernet/RS485 IEC 61000-4-4(EFT): 2kV for power, 1kV for Ethernet/RS485
	Isolation	Isolation for both serial, Ethernet, CAN, and power
	Dimension	120×85×30mm (without terminals/rail); 137.3×30×109.3mm (with terminals/rail)
	Installation	DIN rail mounting, aluminum housing
	Operating Temperature	-40°C to +85°C
	Storage Temperature	-40°C to +105°C (non-condensing)
	Operating Humidity	5%–95% (non-condensing)
Software	Protocol	EtherCAT slave to Modbus RTU/TCP master
	EtherCAT protocol	Up to 128 TXPDO and 128 RXPDO groups in EtherCAT, with 128 variables per group
	Modbus protocol	Edge data collection and computation for up to 2,000 data points
	Setup	Setup tool on PC

USR-PX530
Catalog	Parameters	Value
Power Supply	Power Input	9-36V DC, 12V/1A is recommended
	Working Current	Idle: 158mA/12V (avg), 163mA/12V (max); Full load: 162mA/12V (avg), 165mA/12V (max)
	Connector	5.08×2P pluggable terminal block with anti-reverse and screw lock
RS485 Interface	Connector	3.81×3P pluggable terminal block with screw lock
	Pin	A (RS485 A), B (RS485 B), G (GND)
	Baud Rate	600~230.4K bps
	Data bits	8
	Stop bit	1, 2
	Parity bit	None, Odd, Even
Ethernet Port	PROFINET	2×PROFINET (P1, P2), 10/100Mbps auto-negotiation, integrated switch function
	Ethernet	1× RJ45 port (10/100Mbps, auto MDI/MDIX), for parameters configuration
	Default IP	192.168.0.7
	Gateway IP	192.168.0.1
Other Interface	Indicators	PWR, WORK, 485, PN
	Reload Button	Press for 3–15s to restore factory settings
	Type-C	Debugging interface for troubleshooting
Physical Parameters	EMC Protection	IEC 61000-4-2(ESD): 6kV contact, 8kV air IEC 61000-4-5(Surge): 2kV common mode, 1kV differential mode for power; 2kV for Ethernet/RS485 IEC 61000-4-4(EFT): 2kV for power, 1kV for Ethernet/RS485
	Isolation	Isolation for both serial, Ethernet, CAN, and power
	Dimension	120×85×30mm (without terminals/rail); 137.3×30×109.3mm (with terminals/rail)
	Installation	DIN rail mounting, aluminum housing
	Operating Temperature	-20°C to +70°C
	Storage Temperature	-40°C to +105°C (non-condensing)
	Operating Humidity	5%–95% (non-condensing)
Software	Protocol	PROFINET slave to Modbus RTU/TCP master
	PROFINET protocol	Supports 16 slots, up to 1400 input/output bytes
	Modbus protocol	Edge data collection and computation for up to 2000 data points
	Setup	PX Tool

USR-PX511
Catalog	Parameters	Value
Power Supply	Power Input	9-36V DC, 12V/1A is recommended
	Working Current	Idle: 43.97mA/12V (avg), 45.76mA/12V (max); Full load: 46.26mA/12V (avg), 48.35mA/12V (max)
	Connector	5.08×2P pluggable terminal block with anti-reverse and screw lock
RS485 Interface	Connector	3.81×3P pluggable terminal block with screw lock
	Pin	A (RS485 A), B (RS485 B), G (GND)
	Baud rate	600~230.4K bps
	Data bits	8
	Stop bit	1, 2
	Parity bit	None, Odd, Even
Ethernet Port	Ethernet	1× RJ45 port (10/100Mbps, auto MDI/MDIX), for parameters configuration
	Default IP	192.168.0.7
	Gateway IP	192.168.0.1
CAN	Connector	5.08×2P pluggable terminal block
	Pin	H: CAN_H signal L: CAN_L signal GND: CAN ground signal
	Baud rate	5kbps ~ 1000kbps, supports custom baud rates
	Terminal register	Built-in 2 x 120Ω terminal resistor, One DIP switch to ON: one 120Ω resistor in parallel both DIP switches to ON: connects two 120Ω resistors in parallel
Other Interface	Indicators	PWR、WORK、485、CAN
	Reload Button	Press for 3–15s to restore factory settings
	Type-C	Debugging interface for troubleshooting
Physical Parameters	EMC Protection	IEC 61000-4-2(ESD): 6kV contact, 8kV air IEC 61000-4-5(Surge): 2kV common mode, 1kV differential mode for power; 2kV for Ethernet/RS485 IEC 61000-4-4(EFT): 2kV for power, 1kV for Ethernet/RS485
	Isolation	Isolation for both serial, Ethernet, CAN, and power
	Dimension	110×27×76.1mm((with terminals/rail)
	Installation	DIN rail mounting, aluminum housing
	Operating Temperature	-40°C to +85°C
	Storage Temperature	-40°C to +105°C (non-condensing)
	Operating Humidity	5%–95% (non-condensing)
Software	Protocol	CANopen slave to Modbus RTU/TCP master
	CANopen protocol	Supports up to 128 groups of RPDO and TPDO, with each group supporting up to 16 variables at most
	Modbus protocol	When works as Modbus RTU master, it supports up to 255 ModbusRTU slave stations, When works as Modbus TCP master, it acts as a TCP client, and supports only one TCP slave station connection.
	Setup	PX Tool

USR-PX531
Catalog	Parameters	Value
Power Supply	Power Input	9-36V DC
	Working Current	Idle: 158mA/12V (avg), 163mA/12V (max); Full load: 162mA/12V (avg), 165mA/12V (max)
	Connector	5.08×2P pluggable terminal block with anti-reverse and screw lock
RS485 Interface	Connector	3.81×3P pluggable terminal block with screw lock
	Pin	A (RS485 A), B (RS485 B), G (GND)
	Baud Rate	600~230.4K bps
	Data bits	8
	Stop bit	1, 2
	Parity bit	None, Odd, Even
Ethernet Port	PROFINET	2×PROFINET(P1, P2),10/100Mbps, auto MDI/MDIX
	Ethernet	1× RJ45 port, 10/100Mbps, auto MDI/MDIX
	Default IP	192.168.0.7
	Gateway IP	192.168.0.1
CAN	Pin	H: CAN_H signal L: CAN_L signal GND: CAN ground signal
CAN	Baud Rate	5K ~ 1000Kbps,
Other Interface	Indicators	PWR, CAN, 485, PN
	Reload Button	Press for 3–15s to restore factory settings
	Type-C	Debugging interface for troubleshooting
Physical Parameters	EMC Protection	IEC 61000-4-2(ESD): 6kV contact, 8kV air IEC 61000-4-5(Surge): 2kV common mode, 1kV differential mode for power; 2kV for Ethernet/RS485 IEC 61000-4-4(EFT): 2kV for power, 1kV for Ethernet/RS485
	Isolation	Isolation for both serial, Ethernet, PROFINET, CAN, and power
	Dimension	120×85×30mm (without terminals/rail); 137.3×30×109.3mm (with terminals/rail)
	Installation	DIN rail mounting, aluminum housing
	Operating Temperature	-20°C to +70°C
	Storage Temperature	-40°C to +105°C (non-condensing)
	Operating Humidity	5%–95% (non-condensing)
Software	Protocol	PROFINET slave to CANopen master PROFINET slave to Modbus RTU/TCP master PROFINET slave to Modbus RTU/TCP slave
	FROFINET	16 slot, up to 1400 input bytes and 1400 output bytes
	Modbus	Supports custom slave devices and point table information, edge data collection and computation for up to 2,000 data points
	CAN	Supports up to 127 CANopen slave devices, supporting up to 128 configurable SDO groups
	Setup	Setup tool on PC

after-sale guarantee

Working Time：

Monday to Friday 8:30-18:00 in Beijing time. Message us online for a quick response when we are on-work. Or you can leave a message. Our sales will contact you as soon as possible. You can get free technical support & professional support for your project on our technical support h.usriot.com. Get in touch with us via email at sales@usriot.com. We want to help with any questions you have.

Delivery：

We will deliver goods as soon as possible after we received the order. The order generated on weekend and holidays will be handled after back. We ship the goods with the following carriers TNT, DHL, FedEx, UPS, shipping agent.

Warranty：

We provide one year's warranty of modules and two year's warranty of cellular routers, cellular modems, serial device servers for any reason. If you believe the item is defective and under warranty, please submit a Return or Exchange request on the product's support page, or contact us at support@usriot.com.

—Network Infrastructure—

● Cellular Routers

● Industrial Switches

● Industrial Wireless

—Device Networking—

● Serial to Ethernet/WiFi

● Cellular Modems

● CAN Device Server

● LoRa Network

● IoT Modules

—Edge Control—

● IoT Gateways

● IoT Controller

—Smart Sensing—

Sensors

Development Kits

Industrial Protocol Converter

Customers Also Bought More+

Top Sellers

after-sale guarantee

Working Time：

Delivery：

Warranty：